Instructions / Assembly

Square
Shims
Caulk Gun
30mm Screws
(Zinc/Stainless;
Plain/Round
head)
Drill
5mm Drill Bit
Phillips Bit
Extension Bit
Holder
(for use with
Phillips Bit)
1/4”
V-Notched
Trowel
— 1 —
If you have any questions or concerns please contact us:
1-434-623-4766
[e-mail]
PRIOR TO INSTALLATION:
· Inspect bathtub to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
· All dimensions are nominal! Be sure to measure your bathtub prior to installation.
· The step-by-step guidelines in the installation instructions are a general reference. Should there be
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss
Madison products by hiring a licensed professional.
· Read installation and maintenance instructions thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety accessories for your protection.
· Two people are recommended to handle and install this product as it is fragile.
· Make sure all wood studs and supports are properly installed.
· Verify all the necessary plumbing is installed by a certified plumber.
· Floor drain and trap are not included
.
SUGGESTED TOOLS & MATERIALS:
Safety
Glasses
Wrench
Level
Screwdriver
Putty Knife
Tape
Measure
Utility
Knife
Flexible
Supply Tube
Adhesive Drop ClothSealant
3-SIDED INTEGRAL FLANGE BATHTUB INSTALLATION INSTRUCTIONS