Installation Sheet

— 2 —
2. Attach Support Bars
· If your model does not come with bars pre
attached, please attach them according to the
included Apron Support Installation Sheet
before continuing to Step 3.
· If the bars are pre attached, please continue to
follow all the steps listed.
Studs must be
flush and square
Wall studs
6” x 12”
Rough
cutout
W
L
6”
12”
1. Rough-In
· Rough plumbing must be pre-installed by a
certified plumber before installation.
· If floor drain-hole installation is needed,
contact a certified plumber.
· Place tub at final desired location and verify
floor drain and bathtub drain align.
2a. Flip tub upside-down using a drop cloth to
help prevent damages.
2b. Cut zip tie and line up the support bar with
the pre-drilled hole in the apron. Then use
the screws to securely attach the support
bar to the apron. Repeat this for the rest of
the support bars.
Drop Cloth
ALCOVE BATHTUB INSTALLATION INSTRUCTIONS