Installation Guide

ONE-PIECE TOILET INSTALLATION INSTRUCTIONS

TOILET SEAT INSTALLATION

— 3 —

1. Dissassemble

· Disassemble the cover cap and the hinge.

2. Construct Hinges

· Insert screw and nut into the hole on the hinge.

· Attach blind hole screw fixing to the bottom of screw.

3. Attach Hinges

· Insert hinges with blind hole screw fixings attached

into holes on toilet bowl.

· Lightly tighten hinges with a screwdriver too allow

for later adjustment.

Pull

4. Adjust and Cover Hinges

· Be sure the hinge is all the way forward for proper

seat fitting.

· Place the covers onto the hinges.

Incorrect: Correct: