Instructions / Assembly

3
Safety Precautions
• NEVER allow children to play in or around the Safety Shelter.
• NEVER store flammable materials or fuel in your Safety Shelter.
• Keep a flashlight(s) or other battery operated lights inside the Safety Shelter. Check or
replace the batteries in these lights twice per year.
• Do not store any items in a manner that would block any of the Safety Shelter vents.
• We suggest stocking your Safety Shelter with provisions and supplies so that it is
ready when needed.
• During a high wind event occupants MUST stay at least 3” away from the walls and
door and remove all loose items from shelves and walls by placing them on the floor to
avoid potential injury from debris impact.
• Do not stand on the bench or use it as a step.
• Recommended weight capacity 350 lbs.
Recommended Tools For Assembly:
• Leather Gloves
• Safety Glasses
• Flashlight
• (1) Torque Wrench Capable of 31 Ft-lbs
• (1) 9/16” Socket
• (1) 1/2” Open End Wrench or Socket Wrench
• (2) 7/16” Open End Wrench or Socket Wrench
Tip: If you’re adding this Accessory to an existing Safety Shelter, remove the appropriate
original nuts and bolts from the Wall Panels and replace them with the hardware provided
with the Accessory.