Product Manual
Table Of Contents
- Cover
- Limited Warranty
- Safety Precautions 1
- Saftey Precautions 2
- Assembly
- Operation 1
- Operation 2
- Operation 3
- Maintenance
- Troubleshooting
- Safety Decals
- Front Skirt Detail
- Hitch Detail
- Motor Base Detail
- Wheel Detail
- Height Adjustment Detail
- Deck Detail
- Blade Driver Detail
- Engine Detail
- Idler Detail
- Console Detail
- Wiring Schematics
- Belt Configuration
- Fuel Tank Detail
- Carbon Canister Detail
- Battery Detail
- Hitch Positioning
- Slope Guide
- Ordering Information
㙆
˜
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK
Item # Description Part #
1 Nut - Serr Flange, 1/4-20 Grade 5 ZY NB524
2 Rubber Flapper 10384
3 Washer - Fender, 1/4X1 1/4OD Gr 2 ZY 11520
4 Bolt - Serr Flange, 1/4-20 X 3/4 GR5 ZY NB690
FRONT SKIRT ASSEMBLY
FIGURE 1
11
HITCH ASSEMBLY
FIGURE 2
Item # Description Part #
1 Plug - 1.75 X 10-14GA Sq Tube 18834
2 Pin - Hitch, 3/8 X 3 w/ Hair Pin 20268
3 Weldment - L Hitch 18829*
4 Washer - SAE Flat 3/8 NB272
5 Bolt - 3/8-16 X 3 NB150
6 Nut - Nyloc 3/8-16 NB182
7 Tube - Hitch Elbow 18833*
8 Pin - Hair, #39 NB127
9 Spacer - Straight Hitch 18974*
10 Pin - Clevis, 3/8 X 2.5 18842
11 Arm - Hitch; Weldment 19132*
12 Bracket - Hitch Bar Clamp 21147*
13 Tube - Hitch 18832*
14 Pin - Clevis, 3/8 X 3.75 18843
15 Bolt - 3/8-16 X 1 1/4 NB618
16 Kit - Replacement, Hitch Assembly 18887
Note: Spacer 18974 (item 9) is used when
pulling straight with hitch tube 18832 (item 13).