Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Safety Precautions 1
- Safety Precautions 2
- Assembly
- Operation 1
- Operation 2
- Operation 3
- Maintenance
- Troubleshooting
- Safety Decals
- Front Skirt Detail
- Hitch Detail
- Gas Tank Detail
- Blade Driver Detail
- Engine & Clutch Detail
- Idler Detail
- Cover Detail
- Caster & Axle Detail
- Axle Support Detail
- Rear Debris Guard Detail
- Console Detail
- Belt Configuration
- Carbon Cannister Detail
- Repair Parts
- Ordering Information
16
CONSOLE ASSEMBLY
FIGURE 8
W
hen ordering replacement parts
* = USE PAINT CODE: GT=GRAY TK=BLACK
When mounting the console assembly it may be necessary to mount it directly to the hitch tube
depending on the vehicle you are towing it with. Some vehicle configurations will allow the
console to be mounted to the vehicle (i.e. ATV rack). Make sure the wiring harness is secure
and will not drag the ground. Periodically check to make sure all hardware is tight and the
wiring harness is secure. NEVER operate this machine without the wiring harness being secure.
† Items 1, 2, 3 & 7 can be purchased as Key Switch Kit 21329.