Use and Care Manual

FIGURE 4
FIGURE 5
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK
GAS TANK ASSEMBLY
12
ITEM NO. PART NO. DESCRIPTION
1
NB612 Nut - Nyloc 1"-8
2
NB738 Washer - Bellv ille, 1 X 2
3
13863 Pulley - 14" X 1" ID
4
NB281 Nut - Nyloc 1/2-13
5
NB555 Washer - USS Flat, 1/2
6
NB596 Bolt - Serrated Flange, 5/16-18 X 3/4
7
13840* Plate - Blade Driver Support
8
13836*
Center - Deck
9
NB170 Nut - Serrated Flange 5/16-18
10
21344 Spacer - Engine Pulley
11
4845 Bearing - Blade
12
18844 Shaft - Blade
13
4858* Blade Driver Housing
14
NB509 Bolt - 1/2-13 X 2
15
21372 Cover - Dust (If Equipped)
16
NB614HT Washer - 1 X 1 1/2
17
13864* Weldment - Stump Jumper
18
NB609 Nut - 3/4-10
19
NB179 Washer - 3/4 X 1 1/4
20
10358 Blade
21
11431 Bolt - 3/4-10 X 2
22
18850
Nut - Nyloc 1"-14
23 18905 Kit - Replacement, Blade Driver
BLADE DRIVER ASSEMBLY
ITEM NO. PART NO. DESCRIPTION
1 18221 Cap, Fuel - 2.50 Gallon, Carb Sealed
2 18214 Fuel Tank - 2.5 Gallon, Carb
3 18333* Bracket - Gas Tank, RT52
4 18331* Mount - For EPA/CARB Gas Tank
5 NB780 Bolt - Serr Flange, ZY 3/8-16X3/4 Gr5
6 NB779 Nut - Serr Flange, Hex ZY 3/8-16
7 NB147 Bolt - 5/16-18 X 7.5 HCC GR2 ZP
8 1002004 Solenoid - 3 Pole
9 14000 Battery - Tie Down
10 13841* Idler Cover - RT52
11 20913* Motor Base - RT52
12 26X249 Screw - .312-18X.75
13 NB275 Washer - SAE Flat 5/16 ZY
14 NB181 Nut - Nyloc 5/16-18 ZY
15 N/A Battery (U1R) Not Included
16 13961* Deck - RT52, Left
17 NB161 Screw - HX Tek 14 X 3/4 ZP
18 14316 Clamp - Conduit, 3/8" x 1/4" Hole
19 NB180 Nut - Nyloc 1/4-20
20 18236 Bolt - Serr Flange 1/4-20 X 1 3/4 GR5 ZY
21 18225 Bracket - Fuel Tank
22 NB274 Washer - SAE Flat 1/4 ZY
23 20914* Bracket - Harness, RC14552CPKA
Note: The pulley, stump jumper, blades, blade hardware and housing
hardware are not included with the 18905 replacement blade driver kit.