Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Table of Contents
- Safety Precautions
- Features
- General Operations 1
- General Operations 2
- General Operations 3
- Maintenance
- Troubleshooting
- Specifications
- Safety & Operation Decals
- Assembly Parts
- Set-Up Directions
- Battery
- Battery Cables
- Height Adjustment
- Hitch Operations 1
- Hitch Operations 2
- Blade Replacement
- Belt Removal & Installation
- Height Adjustment Assembly
- Front Skirt Assembly
- Covers Assembly
- Engine Guard Assembly
- Gas Tank Assembly
- Solenoid Assembly
- Deck Assembly
- Hitch Assembly
- Blade Driver Assembly
- Engine Pulley & Belt Assembly
- Idler Configuration
- Console Assembly
- Wiring Diagram
- California Emissions Requirements
- Torque Specifications Reference Guide
- Slope Guide
- Ordering Information
44” BRUSH KING
TRAIL CUTTER
Each Cutter has its own model number. Each engine has its
own model number. The model number for the Cutter will be
found on the right hand side of the motor mount. The model
number for the engine will be found on the top of the valve
cover.
All Cutter parts listed herein may be ordered directly from
Swisher or your nearest Swisher dealer.
All engine parts may be ordered from the nearest dealer of the
engine supplied with your Cutter
.
WHEN ORDERING PARTS, PLEASE HAVE THE
FOLLOWING INFORMATION AVAILABLE:
* PRODUCT – RC44’’ BRUSH KING TRAIL CUTTER
* SERIAL NUMBER - _______________
* MODEL NUMBER - _______________
* ENGINE MODEL NUMBER - _______________
TYPE - _______________
* PART NUMBER
* PART DESCRIPTION
TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650
SWISHER ACQUISITION INC.
1602 CORPORATE DRIVE
WARRENSBURG, MO 64093
www.swisherinc.com
OWNER’S
MANUAL
www.swisherinc.com
CHANGING YOUR LANDSCAPE SINCE 1945
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment.
MODEL NO.
RC14544CP4K
RC14544CP4K-CA
34