Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Table of Contents
- Safety Precautions
- Features
- General Operations 1
- General Operations 2
- General Operations 3
- Maintenance
- Troubleshooting
- Specifications
- Safety & Operation Decals
- Assembly Parts
- Set-Up Directions
- Battery
- Battery Cables
- Height Adjustment
- Hitch Operations 1
- Hitch Operations 2
- Blade Replacement
- Belt Removal & Installation
- Height Adjustment Assembly
- Front Skirt Assembly
- Covers Assembly
- Engine Guard Assembly
- Gas Tank Assembly
- Solenoid Assembly
- Deck Assembly
- Hitch Assembly
- Blade Driver Assembly
- Engine Pulley & Belt Assembly
- Idler Configuration
- Console Assembly
- Wiring Diagram
- California Emissions Requirements
- Torque Specifications Reference Guide
- Slope Guide
- Ordering Information
29
CONSOLE ASSEMBLY
FIGURE 29.1
When mounting the console assembly it may be necessary to mount it directly to the hitch tube
depending on the vehicle you are towing it with. Some vehicle configurations will allow the
console to be mounted to the vehicle (i.e. ATV rack). Make sure the wiring harness is secure
and will not drag the ground. Periodically check to make sure all hardware is tight and the
wiring harness is secure. NEVER operate this machine without the wiring harness being secure.
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK
WIRING DIAGRAM
FIGURE 29.2
† Items 1, 2, 3 & 7 can be purchased as Key Switch Kit 21329.
Note: Some parts not shown for clarity.
PARTS DIAGRAMS