Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Table of Contents
- Safety Precautions
- Features
- General Operations 1
- General Operations 2
- General Operations 3
- Maintenance
- Troubleshooting
- Specifications
- Safety & Operation Decals
- Assembly Parts
- Set-Up Directions
- Battery
- Battery Cables
- Height Adjustment
- Hitch Operations 1
- Hitch Operations 2
- Blade Replacement
- Belt Removal & Installation
- Height Adjustment Assembly
- Front Skirt Assembly
- Covers Assembly
- Engine Guard Assembly
- Gas Tank Assembly
- Solenoid Assembly
- Deck Assembly
- Hitch Assembly
- Blade Driver Assembly
- Engine Pulley & Belt Assembly
- Idler Configuration
- Console Assembly
- Wiring Diagram
- California Emissions Requirements
- Torque Specifications Reference Guide
- Slope Guide
- Ordering Information
BLADE DRIVER ASSEMBLY
FIGURE 27.1
Item # Description Part #
1 Nut - Nylon Lock, 1"-8 NB612
2 Washer - 1" X 2" X 14GA NB738
3 Pulley - Blade, 12" OD 20920
4 Spacer - Pulley 21344
5 Bearing - Blade 4845
6 Shaft - Blade 18844
7 Nut - Nylon Lock, 1/2"-13 NB281
8 Washer - USS Flat, 1/2" NB555
9 Blade Driver Housing 4858*
10 Bolt - Hex 1/2"-13 X 2" NB509
11 Cover - Dust, RC Housing 21372
12 Washer - Flat, 1" X 1 1/2" NB614HT
13 Nut - Nylon Lock, 3/4"-10 NB609
14 Weldment - Stump Jumper 4859*
15 Washer - Flat, 3/4" X 1 1/4" NB179
16 Blade - Off-Set, Rough Cut 10358
17 Bolt - Hex, 3/4-10 X 2" 11431
18 Nut - Nylon Lock, 1"-14 18850
19 Kit - Replacement, Blade Driver 18905
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK
Note: The pulley, stump jumper, blades, blade hardware
and housing hardware are not included with the 18905
replacement blade driver kit.
27
Note: Some parts not shown for clarity.
PARTS DIAGRAMS