Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Table of Contents
- Safety Precautions
- Features
- General Operations 1
- General Operations 2
- General Operations 3
- Maintenance
- Troubleshooting
- Specifications
- Safety & Operation Decals
- Assembly Parts
- Set-Up Directions
- Battery
- Battery Cables
- Height Adjustment
- Hitch Operations 1
- Hitch Operations 2
- Blade Replacement
- Belt Removal & Installation
- Height Adjustment Assembly
- Front Skirt Assembly
- Covers Assembly
- Engine Guard Assembly
- Gas Tank Assembly
- Solenoid Assembly
- Deck Assembly
- Hitch Assembly
- Blade Driver Assembly
- Engine Pulley & Belt Assembly
- Idler Configuration
- Console Assembly
- Wiring Diagram
- California Emissions Requirements
- Torque Specifications Reference Guide
- Slope Guide
- Ordering Information
Description
Engine 14.5HP (603 CC) Kawasaki
Engine Specifications
See engine Manual for Specifications
Starting
Electric Start
Battery
12 Volt ("U1" recommended), 340CCA
Fuel
2.5 Gal. (9.46 L), Unleaded Gasoline (MIN 87 Octane)
MAX 10% Ethanol
Overall Dimesions
139.5" L x 47" W x 34" H (MAX)
Console Cable Length
10' 4"
Offset Distance
(Tow ball to offset cutting edge)
Max 52", Mid 39" (See page 19 for details)
Offset Positions
5 (2 Left, 1 Center, 2 Right)
Cutting Height
3" - 7.5"
Cutting Width
44"
Blade Style
Swing Blade w/ Stump Jumper
Discharge
Rear
Drive System
Belt
Blade Engagement
Electric Clutch
Towing Speed
5 MPH MAX
Mowing Speed
5 MPH (Flat Ground) 4 MPH MAX (Rough Ground)
Unit Dry Weight
640 Lbs. (290 kg)
Tire PSI
20 PSI Recommended (MIN 15 PSI - MAX 35 PSI)
Description Part Number
Belt - B X 56"
20937
Wheel/Tire - 16/650X8
21262
Bearing - Blade; RT44
4845
Blade - Off-Set, Rough Cut
10358
Quick Reference - Maintenance Parts
Note:
• For other part numbers, refer to the Parts Diagrams on pages 22-30.
11
SPECIFICATIONS