Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Table of Contents
- Safety Precautions
- Features
- General Operations 1
- General Operations 2
- General Operations 3
- Maintenance
- Troubleshooting
- Specifications
- Safety & Operation Decals
- Assembly Parts
- Set-Up Directions
- Battery
- Battery Cables
- Height Adjustment
- Hitch Operations 1
- Hitch Operations 2
- Blade Replacement
- Belt Removal & Installation
- Height Adjustment Assembly
- Front Skirt Assembly
- Covers Assembly
- Engine Guard Assembly
- Gas Tank Assembly
- Solenoid Assembly
- Deck Assembly
- Hitch Assembly
- Blade Driver Assembly
- Engine Pulley & Belt Assembly
- Idler Configuration
- Console Assembly
- Wiring Diagram
- California Emissions Requirements
- Torque Specifications Reference Guide
- Slope Guide
- Ordering Information
IF PROBLEMS PERSIST HAVE A QUALIFIED MECHANIC SERVICE
THE CUTTER. NEVER ATTEMPT TO MAKE AN ADJUSTMENT THAT
YOU ARE NOT SURE IS CORRECT. DOING SO CAN CAUSE OTHER
PROBLEMS.
10
TROUBLESHOOTING
ISSUE SOLUTION
Disengage blades, turn key switch to the “OFF” position,
check battery and all other electrical connections and
inspect spark plug and wire.
See Engine Manual for Troubleshooting.
Contact Engine Manufacturer or Qualified Mechanic.
See Engine Manual for Troubleshooting.
Check the Throttle Adjuster.
Check Spark Plug and Gap.
Replace fuel, Check Fuel Filter and Fuel Line.
Ensure each Height Adjustment is set to the same level.
Check Tire PSI and for tire/wheel damage.
Without the engine running, make certain blades are installed
identically and not damaged.
Decrease Tire Pressure.
Tow at a Lower Speed.
Check all Hardware and Make Sure Nothing is Overtightened.
Check for Deformed Pins.
Make sure all Moving Parts are Free of Debris.
Check tire pressure. May need to reduce PSI.
Slighty tighten the nut on top of the caster. Do not Overtighten.
Reduce Speed.
Engine Will Not Start
Engine Runs Poorly
The Unit is not Cutting Level
The Cutter Bounces Excessively
Hitch Will not Pivot
Caster Wheels Wobble
Excessively