Use and Care Guide

INSTALLATION INSTRUCTIONS:

• Install the caster assembly to the inside of the deck as shown in Figure 3 with the ten nuts (NB170) and

ten bolts (NB596) supplied with this kit. It is recommended that you loosely assemble all hardware in

this step before using two 1/2” box end wrenches to tighten the caster assembly securely to the deck.

Model WBRC11524 is shown.

Item # Part # Description Qty

1 NB170 Nut - Serrated Flange 5/16-18 10

2 19630 Walk Behind Caster Kit 1

3 NB596 Bolt - Serrated Flange, 5/16-18 X 3/4 10

Note: It may be necessary to adjust

the height of the left and right skids.

Note: Items called out on this page are

components of Caster Kit 19630.

Assembling Your New Caster Kit

Figure 3