swisherinc.com Owners Manual MODEL NO. 11730 TRUCK SPREADER IMPORTANT Read and follow all Safety Precautions and Instructions before operating this equipment. Assembly Replacement Parts REV 08-086 12000 1602 CORPORATE DRIVE, P.O.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
Item # 1 2 3 4 5 6 7 8 9 10 18 20 Part # 10113 NB505 NB556 NB579 7825Z 10051 NB555 10112TK 10111TK NB181 10192 10975 Description Deflector - Spreader Bolt - 5/16-18 X 1 1/2 HCC GR5 ZY Washer - USS Flat, 5/16 ZY Washer - Fender, 5/16 X 1 1/4 OD ZY Bushing - Lift Bar Spring - Gate, 12V ATV Spreader Washer - USS Flat, 1/2 ZY Gate - Hopper Bracket - Motor Support, Upper Nut - Nyloc 5/16-18 ZY Washer - Nylon Retainer 5/16" Tank - Truck Spreader Step 1: Assemble the components as shown.
Item # 9 11 12 13 14 15 16 Part # 10111TK 10114TK 10197 10117TK 3844 15118 10118 Description Bracket - Motor Support, Upper Bracket - Motor Support, Lower Bolt - Carriage 5/16-18 X 1 GR5 Shield - Spreader Knob - T, 5/16-18 Motor - Spreader 12 VDC CW 2.5" Spinner - Distributor, Spreader Step 3: Remove the nuts and snap ring from the motor and place the Lower Motor Support Bracket (11) over the Motor (15). Thread the nuts onto the motor studs and tighten.
Item # 3 10 21 22 24 25 Part # NB556 NB181 10976TK 10979TK NB501 NB579 Description Washer - USS Flat, 5/16 ZY Nut - Nyloc 5/16-18 ZY Support - Weldment, LH; Truck Spreader Support - Weldment RH; Truck Spreader Bolt - 5/16-18 X 1 HCC GR5 ZY Washer - Fender, 5/16 X 1 1/4 OD ZY GR2 Step 5: Attach the Support Tube Weldments (21 & 22) to the tank by inserting the bolts (24) through the Washers (25) and the Weldments (21 & 22), and into the holes on the side of the tank as shown.
Item # 10 23 25 26 27 Part # NB181 10981TK NB579 9855 11728TK 10176 10531 Description Nut - Nyloc 5/16-18 ZY Mount - Weldment; Truck Spreader Washer - Fender, 5/16 X 1 1/4 OD ZY GR2 Bolt - U, Sq 3/8-16 x 1 5/8" x 2 1/2" Support - Weldment; Truck Spreader Lid - Tank Adapter - Kit, 12 Volt Step 6: Attach the Mounting Weldment (23) to the Spreader Assembly by putting the U-Bolts (26) over the Mounting Tubes (21 & 22) and into the holes on the Mounting Weldment (23).
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual Model Numbers Truck Spreader 11730 WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment.
