User's Manual



SwipeSense,Inc.
4619NRavenswoodAve.
Suite202
Chicago,IL.60640
(847)440‐6215

CommunicationHubModel:
620.0
Confidential Page5of5
May2016

ProductDescription
Thisisawall‐mounteddevicethatisplacedatanurse’sstation.Thisdevicereceivesinformationfromthe
LocationHubs,HygieneSensorsandBadges.Italsotransmitssoftware updatesto the LocationHubs,
HygieneSensorsandBadgesasnecessary.ApictureofaninstalledCommunicationHubisprovidedin
Figure1.

Figure1:InstalledCommunicationHub
InstallationProcedures
1. SelectalocationnearapoweroutletandEthernetconnection.
2. Wipedownthewallandletdrytoremovedebris.
3. ScanandrecordtheserialnumberoftheCommunicationHubusingtheSwipeSenseMobileApp.
4. Enterall‐assignmentrelatedinformationfortheCommunicationHub using the SwipeSense
MobileApp.
5. ApplymountingadhesivetothebackoftheCommunicationHub.
6. PositiontheCommunicationHubonthewall.
7. ConnecttheEthernetcabletotheCommunicationHub.
8. ConnectthepowercabletotheCommunicationHub.Asteadylightdesignatesthedeviceisfully
operational.