NE 4412 KIT INCLUDES: Qty. Description 5/16" x 3" Carriage Bolt 5/16" Loc Nut 516" Flat Washer Spacer Steering Wheel Cap Steering Wheel o INSTRUCTIONS 1. Choose a desired location for the steering wheel and drill a 3/8” diameter hole through the lumber. NOTE: /f umber is greater than 2" in depth, you will need to counter bore the hole appropriately. 2. Mount steering wheel to climbing unit as indicated in Fig. 1. 3. Snap steering wheel cap into place (Fig. 1). Carriage Bolt Fig.
