User Manual
T
OP
OF DECK
FIG. 1
8”
Installation Instructions:
1. Position Safety Handles in
each ladder or slide opening.
The bottom hole of the safety
handle should be 8” from the
top of the deck.
2. Mark the hole locations and
drill a pilot hole at each location
using a 1/8” drill bit.
3. Attach safety handles to the
unit using two 1-3/4” screws
and 1/4” washers per handle
(see Fig. 1).
Kit Includes:
2 Safety Handles
4 1-3/4” Screws
4 1/4” Washers
1 Plan
1-3/4”
Screw
Washer
© Playcore company 2005
Printed in U.S.A. LA 5416
Safety Handles
Safety Handles