Instructions / Assembly

46
SLIDE
SLIDE
Pre-drill 1/8” pilot holes through Slide at dimples,
through deck planks, and into lower slide support.
Ensure screws are installed through deck planks.
Move slide slightly to avoid spaces between planks.
Pre-drill 1/8” pilot holes through Slide at dimples,
through deck planks, and into lower slide support.
Ensure screws are installed through deck planks.
Move slide slightly to avoid spaces between planks.
Locate Slide in the opening between Balusters
on the FRONT SIDE of the Tower.
Locate Slide in the opening between Balusters
on the FRONT SIDE of the Tower.
FRONT SIDE
FRONT SIDE
INSTALL
INSTALL
3-1/2”
2”
3-1/4”
3-1/4”
x1
x1
2099
2654
2-1/2” Pan Head Wood Screw x2
1/4 x 1” Fender Washer x2
2-1/2” Pan Head Wood Screw x3
1/4 x 1” Fender Washer x3
NOTE: IF SLIDE HAS THREE HOLES, INSTALL SCREWS 2" FROM FRONT OF DECK.
NOTE: IF SLIDE HAS TWO HOLES, INSTALL SCREWS 3-1/2" FROM FRONT OF DECK.