Instructions / Assembly

46
SLIDE SURFACING MATERIAL (not supplied)
Apply Surfacing Material at
recommended depth, or deeper.
Hammer 1015 Ground Stake
into ground on either side of
slide and attach to slide wall
using (2) 1" Screws.
1 x 1-3/8 x 17"
1015
SAFETY HANDLES INSTALL
Attach Left and Right Safety Handles to the Step Ladder Rails with two 1/4" x 1-1/2" Lag Bolts
through 1/4" Flat Washers. Attach third Safety Handle as shown.
The height of the handles is to be determined by the customer - depending on the age of the child, etc.
Flat
Washer
1/8" Pre-Drill
(Do not drill
through.)
1-1/2" Lag Bolts
DO NOT OVER-TIGHTEN LAG BOLTS
x3
2405