Instructions / Assembly

SWING BEAM SWING HANGERS

7" Carriage Bolts

x12

Lock Nut

x12

Flat Washer

x12

Torque Washer

x12

6-1/2"

Carriage Bolt

x12

Lock Nut

Flat Washer

Torque Washer

SWING BEAM SUPPORT INSTALL

3/8” x 6-1/2” Carriage Bolt

3/8” x 6” Hex Bolt

METHOD A

NOTE: DEPENDING ON THE FASTENERS PROVIDED THERE ARE TWO METHODS TO

INSTALL 2542-ST SWING BEAM SUPPORT. LOCATE EITHER SET OF FASTENERS

SHOWN BELOW AND INSTALL ACCORDINGLY.

IF YOU HAVE (X4) 6" HEX BOLTS IN YOUR KIT, INSTALL USING METHOD A.

IF YOU HAVE (X4) 6-1/2" CARRIAGE BOLTS IN YOUR KIT INSTALL USING METHOD B.

METHOD B

3-1/2 x 5-1/2 x 95"

2749-W

2433

NOTE: Ensure two

to three threads

are exposed past

Lock Nut.

NOTE: You may need to tap bolts

with hammer to get through holes.

Clean all debris from bolt threads

before installing lock nuts.