Instructions / Assembly

13
Assembly Instructions
75
Slide Barrier Construction
1. Carefully remove your Barrier Support Boards
from the barrier where you would like to place
your slide, making certain you will have a clear
72'' Safety Zone for your slide. (Fig. 6).
Retain this lumber and fasteners as you will need
them in a later step.
2. Cut to length and install (2) 2'' x 4'' Barrier
Support Boards as shown in (Fig. 6a), making
certain the opening between them is 25''.
3. Cut (1) 2'' x 4'' Barrier Board to the height of
your barrier railing and create a slide opening of
23'', as shown in (Fig. 6a).
4. Reattach your barrier boards, making certain
they are evenly spaced and do not have a gap
larger than 3'' between each board, as shown in
(Fig. 6a).
75/

2'
'
x 4'
'
Cut T
o Width of Y
our
Unit

2-1/2''
screws
per joint
25''
23''
3-1/4'' Gap
Between Each
Barrier Board
2
''
x
4
''
Cut To Wid
th
o
f Yo
u
r Un
it
#$)
)67A>:/<CA3A/53<3@71B=E3@B=
7::CAB@/B3B63)C@0=)C03(:723037<5
/BB/1632=E3D3@B67AA/;3>@=132C@3
7AB=03CA324=@/<G(E7<5#(:723
Z)=E3@%:/GA3B
5' DECK HEIGHT
2'' x 4''
Barrier Board
Cut to Height
of Rail

2-1/2''
screws
per barrier
board