Instructions / Assembly

37
PB 9210 Assembly Instructions
1-1/2”
lag bolt
metal strap
Anchor-It
Flat Washer
Anchor-It Installation.
Instructions for Anchoring Swing•N•Slide Activity Centers
 Determine the final location of your activity center.
2. Place the Anchor-It stakes adjacent to the base and near the corners of your activity center (at the bottom of the legs on swing sets) and
twist the auger-style stakes into the ground until only the loop is exposed.
 Place the metal strap through the loop of the Anchor-It stake and secure it to the unit with a lag screw and washer as illustrated to the
right. Note: Attach the strap to the unit with as little play as possible using whatever holes in the strap that work best.
Anchor-It
Fig. 24