Instructions / Assembly
33
PB 9210 Assembly Instructions
Climbing Rope
Secure top of Climbing Rope on the bottom center of the 2’’ x 4’’ x 32’’ as shown in )LJE.
2. Using two rope staples secure the bottom of the climbing rope. Tap two staples in place approximately 1’’ apart. Wrap the rope under the
5/4’’ x 6’’. Then thread the rope through both staples. Double the rope back on itself and through the first staple. Pull the rope tight and
secure in place by pounding staples in place. See )LJ.
Once you have Secured end of climbing, rope cut off any excess with a sharp knife or scissors.
)LJD
1’’
1’’
5/4’’ x 6’’ x 25’’
)LJE
2’’ x 4’’ x 32’’
(2)
2’’ Lag Screws
Eye Strap
)LJ
2’’ Lag screw
BACK OF BOARD