Instructions / Assembly

3
PB 9210 Assembly Instructions
For further information on playground safety, the Consumer Product Safety Commission(CPSC) publishes the Outdoor Home Playground Safety
Handbook which can be downloaded for free from www.cpsc.gov. An additional resource is the American Society of Testing and Materials (ASTM)
6WDQGDUG&RQVXPHU6DIHW\3HUIRUPDQFH6SHFLÀFDWLRQIRU+RPH3OD\JURXQG(TXLSPHQW$670)ZKLFKFDQEHSXUFKDVHGDQGGRZQORDGHG
from www.astm.org.
Tighten all hardware.
Lubricate all metallic moving parts per manufacturer’s instructions.
Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
Check metal parts for rust. If found, sand and repaint using a nonleaded-based paint meeting the requirements of 16 CFR 1303.
Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members.
Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Tighten all hardware.
Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Lubricate all metallic moving parts per manufacturer’s instructions.
Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
Remove plastic swing seats, tents, sandbox cover, tire swing, slide and other items as specified by the manufacturer and take indoors or do not use.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth.Replace as necessary.
Owner shall be responsible for maintaing the legibility of warning labels.
When you are ready to dispose of your playset, make sure that all metal, plastic and wood components are disposed of in accordance with local
waste ordinances.
%X\HUDQGRURZQHUVKRXOGGLVDVVHPEOHDQGGLVSRVHRIWKHSOD\JURXQGHTXLSPHQWLQVXFKDZD\WKDWQRXQUHDVRQDEOHKD]DUGVZLOOH[LVWDWWKH
time the swing set is discarded. Do not burn your playset's preserved wood.
At the beginning of each play season:
Twice a month during play season:
Once a month during play season:
$WWKHHQGRIHDFKSOD\VHDVRQRUZKHQWKHWHPSHUDWXUHGURSVEHORZ)
PLAYSET MAINTENANCE
Cosmetic defects that do not affect the structural integrity of the product, or natural defects of wood such as warping, splitting, checking, twisting,
shrinkage, swelling or any other physical properties of wood that do not present a safety hazard, are not covered by our warranty.
To help minimize these natural defects we recommend applying a sealer or stain every two or three years, or more often as the climate dictates.
Power washing, sanding or other preparatory methods should be used prior to sealing or staining.
Periodic maintenance is required to ensure safe enjoyment of your playset and accessories. Read and follow the Playset Checklist below to reduce
the likelihood of serious or fatal injury. Use the checklists as a guide for proper playset care and maintenance.
PLAYSET CHECKLIST