Instructions / Assembly

29
PB 9210 Assembly Instructions
3/8” Holes
(2)”T” nuts
Hold (rock)
(2) 1-1/4’’ Hex Head Bolts
(1) Lock Washer per bolt
(1) Flat Washer per bolt
)LJD
(2)
2-1/2’’ Screws
per joint
)LJ
)LJE
2-1/2’’ screw
(6) 1’’ x 6’’ x 24-3/4’’
2’’ x 4’’ x 47-1/2’’
2’’ x 4’’ x 47-1/2’’
Note: 2-3/4’’ GAP
TYP.
3/4’’ GAP
Rock Wall Assembly
Assemble Rock Wall as shown in )LJ.
2. Mark locations of Climbing Rocks on the Rock Wall in a pattern that will easily allow your child to climb to the deck. Make sure the bolt hole
locations are clear of wall supports before drilling.
 Drill holes through the wall at the desired locations using a 3/8” drill bit. Install Climbing Rocks as shown in
)LJD.
4. Make sure the Rock Wall and Climbing Rock connections are secure before allowing any children to play on the Rock Wall.
Attach Rock Wall as shown in )LJE.
(3)
2-1/2’’ Screws
per joint
FLUSH
FLUSH
HINT: Pre drill 1/8” hole to
help avoid splitting.
FLUSH on ends and bottom