Instructions / Assembly

25
PB 9210 Assembly Instructions
Barrier Board Installation
Install barrier boards as shown in )LJ.
Note: There will be a 1-1/4’’ gap between the deck and the bottom of the barrier
boards as shown in )LJD.
2. Install (4) decorative Angle Cut boards as shown in )LJE.
)LJ
(2) 5/8’’ x 6’’ x 28-3/4’’
1-1/2’’ screw
1-1/4’’
Gap Typ.
)LJD
)LJE
(2) 5/8’’ x 4’’ x 16-1/4’’ Angle Cut
(2)
1-1/2’’ screws
per joint in corner post
(2)
30mm screws
per joint in board
(2)
1-1/2’’ screws
per joint
23-1/2’’
30mm screw
HINT: Pre drill 1/8” hole to help
avoid splitting.