Instructions / Assembly
18
PB 9210 Assembly Instructions
3-1/2''
15-1/4''
15-1/4''
14''
19''
14-1/4''
5-1/2''
19''
48-1/4''
67-1/4''
81-1/2''
87''
120''
12''
34-1/4''
19''
118''
99''
3-1/2’’
Drill 3/8’’
Hole
Swing Beam
TOP VIEW
)LJ
A-FRAME ATTACHES
HERE
Swing Beam Drill Locations
Use a 3/8’’ drill bit to drill a 3/8’’ hole through the beam at
each location shown in )LJ
2. Install Swing Hangers onto swing beam at locations shown.
Note: Swing Hangers must be installed on the same side
dimensions were originally measured and marked.