Instructions / Assembly

14
STEP 3
Check to make sure struc-
ture is square
FRAME A
PF 6082 3/4’’ x 3-3/8’’ x 31-1/2’’
PF 6093 1’’ x 3-3/8’’ x 31-1/2’’
1. Attach frame Support Boards to Frame A as shown above.
Note: Tap each T-Nut into its pre-drilled hole until the metal tangs sink fully into the wood.
2-1/2” Deck Screw (x16)
(3)
2-1/2’’ Screws
94-1/4’’
58-5/8’’
PF 6093 1’’ x 3-3/8’’ x 31-1/2’’
5/16-18 X 4’’
Hex Head Bolt
5/16’’Loc-Washer
5/16’’ Washer
T-Nut
Small
(2)
2-1/2’’ Screws
Flush
PF 6084 3/4’’ x 3-3/8’’ x 54-1/2’’
Flush
PF 6069 5/8’’ x 3-3/8’’ x 31-1/2’’
PF 6069 5/8’’ x 3-3/8’’ x 31-1/2’’
3-1/2’’
(3)
2-1/2’’ Screws
Flush