Instructions / Assembly

TOOLS REQUIRED
DRILL
10mm & 6mm
SOCKETS &
WRENCH
ADJUSTABLE
WRENCH
TAPE MEASURE
HELPFUL ASSEMBLY INFORMATION
It is important to ensure all lumber, accessories and hardware is accounted for. The following pages
list the contents of each box. Use these pages to take an inventory of all parts.
REMEMBER- If you are missing anything, please DO NOT RETURN to the store where purchased.
Contact our Customer Service Department at 1-800-888-1232 or email us at:
[e-mail]
PHILLIPS BIT
ALLEN WRENCH
3/8” DRILL BIT
SHOVEL
WOOD SAW
SOLD SEPARATELY
Designs B & C require ller board(s) to complete the assembly. Purchase listed lumber and
fasteners separately and cut lumber to the width of your playset.
(2) 2’’ x 4’’ x 96’’
*ATTENTION* RETAIN THESE PIECES *ATTENTION*
Spacers used in the protective packing of your accessory will be used during the ladder installation onto your
playset. Make certain to hold on to these components for later use.
(3) Bracket Rings
(8) 2-1/2” Deck Screws
(for treated wood)
6