Instructions / Assembly

Assembly Instructions

Washer

Loc Nut

Fig. 2a

Fig. 2

Fig. 2b

Elbow Support

Bracket

Exit Section - 9 bolts

Elbow Section - 9 bolts each

ELBOW AND EXIT SECTION ASSEMBLY

1. Assemble the Elbow Section by securing as shown in

(Fig. 2) and (Fig. 2a). Join sections using a hex head

bolt, two flat washers, and a loc nut at each hole

junction.

NOTE: Fasten each loc nut finger tight. Each time you

join parts be sure each flanged lip is mating with a flat

lip.

2. Repeat step 1 to assemble (3) remaining Elbow Sections.

3. Assemble and secure the Exit Section as shown in

(Fig. 2a) and (Fi

g. 2

b). Make certain to attach the

Elbow

Support Bracket to the bottom of the flange,

as shown in (Fig. 2b).

4. Tighten all hardware.

NOTE: Interlocking design of flanges on Elbow pieces

will assist in assembly.

Fl ANGE DETAIl

Flange Opening

Hex Head Bolt