Instructions / Assembly

2
Cantilever beam
T-nut
2-1/2’’ screws
Washer
A-Frame Assembly cont.
1. Attach A-Frame beam to Swing Beam using (1) 3-1/2’’ hex bolt, (1) washer and (2) screws as shown
in (Fig. 12).
2. Repeat on other bracket. Tighten both hex bolts to flush with top of T-nuts.
Fig. 12
2-1/2’’ screw
3-1/2’’ Hex Head Bolt
3-1/2’’ Hex Head Bolt