Instructions / Assembly

PRINCESS MIRROR:

1. Choose a desired location for the Princess Mirror.

2. Secure Princess Mirror in place using (4) 1'' PanHead Screws, and (4) White Rubber Washers at

the locations shown. Be careful not to crack the mirror by overtightening the hardware.

PRINCESS PHONE:

1. Choose a desired location for the Princess Phone.

Note: Take care to avoid any possible issues outlined in the ﬁgures above.

2. Secure the Princess Phone Base to a Flat Surface on your playset using (1) 1'' Panhead Screw and

(1) Black Rubber Washer.

3. Place the Princess Phone Headset on the Princess Phone Base.

PRINCESS ACTIVITY PANEL:

1. Choose a desired location for the Princess Activity Panel.

2. Pull the Princess Activity Panel taut and secure two corners of the Activity Panel using (2) 3/4''

Pan Head Screws and (2) Flat Washers.

3. Pull the Activity Panel taut and secure the remaining corners with (2) 3/4'' Pan Head Screws and

(2) Flat Washers.

Mounting Instructions

Avoid

Spaces

3'' to 9''

1'' PanHead

Screw

To Purchase Additional Disney Accessory Kits, Please Visit www.swing-n-slide.com

1'' PanHead Screw

White Rubber

Washer

White Rubber

Washer

Avoid

Placing on

Ladders and

Near Floor

Surfaces

Avoid Overhangs

Black Rubber

Washer

Phone

Base

AVOID THESE POSSIBLE ISSUES

3/4''

PanHead

Screw

3/4''

PanHead

Screw

Flat Washer