Instructions / Assembly

43
SLIDE INSTALL
Pre-drill 1/8" pilot holes through Slide at dimples,
through deck planks, and into lower slide support.
Ensure screws are installed through deck planks.
Move slide slightly to avoid spaces between planks.
Locate Slide centered in the opening between
Balusters on the FRONT SIDE of the Tower.
FRONT SIDE
3/4"
CENTER CENTER
x1
2654
1-3/4" Pan Head
Wood Screw x3
SLIDE
SURFACING MATERIAL
(not included)
Apply Surfacing Material at
recommended depth, or deeper.
Hammer PF 6295 Ground
Stake into ground on
either side of slide and
attach to INSIDE slide wall
using (2) 1-1/4" Screws.
1-3/8 x 3-3/8 x 17"
PF 6295
4"