Instructions / Assembly
42
Install stakes into 3 x 3" uprights.
Locate stakes as shown.
Make sure all base pieces and uprights are resting
at on the ground.
It may be necessary to loosen the soil beneath
Playset to make everything level.
Instructions for anchoring your playset product to the ground.
1. Determine the nal location of your playset product.
2. Place the Anchor Stakes adjacent to the base and near
the corners of your playset product (at the bottom of
the legs on swing sets) and twist the auger-style Anchor
Stakes into the ground until only the loop is exposed.
3. Place the metal strap through the loop of the
Anchor Stake and secure it to the unit with a lag screw
and washer as shown.
Note: Attach the strap to the unit with as little play as
possible using whatever holes in the strap work the best.
1-1/2" Lag Bolts x2
Flat Washers x2
x2
WS 4521
TOWER UPRIGHT A FRAME
Flat Washers x2
Metal Anchor Straps x2
1-1/2"
Lag Bolts x2
x2
WS 4521
STAKES
INSTALL
SWING
BEAM
SIDE
Metal Anchor
Straps x2