Instructions / Assembly

43
SLIDE
EQUAL EQUAL
INSTALL
3/4"
3/4"
Measure and locate holes 3/4” from edge of deck.
2-1/2" Pan Head Wood Screw x2
1/4" x 1" Fender Washer x2
FOR 2654 SLIDE, BRANDED
ONLY FOR 2654 SLIDE, BRANDED
Pre-drill 1/8" pilot holes through slide at
dimples through deck planks.
Center Slide Block Á ush to bottom of
deck and secure using (2) 2” Screws.
2490-CC
1-1/2 x 2-1/2 x 24”
Secure Slide using (3) 2-1/2”Pan
Head screws through pre-drilled
holes into slide block.
Locate Slide centered in the opening between
balusters on the LEFT SIDE of the tower.
1
2
3
4
SLIDE SURFACING MATERIAL (not supplied)
Apply Surfacing Material at
recommended depth, or deeper.
Hammer 1015-CC Ground Stake
into ground on either side of
slide and attach to INSIDE slide
wall using (2) 1" Screws.
4”
1 x 1-3/8 x 17"
1015-CC