Instructions / Assembly

42
STAKES
Install stakes into 3x3" uprights.
Locate stakes as shown.
Make sure all base pieces and uprights are resting
Á at on the ground.
It may be necessary to loosen the soil beneath
Playset to make everything level.
1/4 x 2-1/2"
Lag Bolts
x2
1/4 x 2-1/2"
Lag Bolts
x2
INSTALL
x2
2601-A
x2
2601-A
SLIDE
Locate Slide centered in the opening between
balusters on the LEFT SIDE of the tower.
Pre-drill 1/8" pilot holes through slide at dimples
through deck planks and into support under deck.
Ensure screws are installed through deck planks.
INSTALL
2-1/2" Pan Head Wood Screw x2
1/4" x 1" Fender Washer x2
EQUAL EQUAL
4"
Drill into support
under deck.
Measure
from edge
of deck.
LEFT SIDE
FOR 2099 SLIDE
1
2
SWING
BEAM
SIDE
NOTE: DEPENDING ON THE SLIDE YOUR INSTALL MAY
VARY. REFER TO METHODS AS SHOWN.