2692 - NOTICE This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-800-437-0784 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST or email: customerservice@backyard-play.
4HIS PAGE INTENTIONALLY LEFT BLANK
2692 Customer Service Backyard Play Systems 1-800-437-0784 Playset 1000 Ternes Drive Monroe, MI 48162 11/12/2013 Model 4185, 4332, 4333, 4334, 4335, 6246, 6351, 6352, 6353, 6354, 6371 Recommended for Ages 3 to 11 BEFORE YOU YOU BEGIN BEGIN --- BEFORE Tools Required Socket Set Hammer Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
ASSEMBLY SAFETY and HELPFUL HINTS STOP!!! Check all parts and hardware before beginning. If any parts are missing or damaged please circle and call the phone number listed. DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET ! KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE AND MAINTENANCE REFERENCE. To aid in making your playset assembly easier, here is a listing of some helpful hints. Wear safety glasses during drilling, assembly of your playset.
SAFETY WARNINGS Please read carefully. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. This playset has been designed for use by a maximum of eight occupants at one time having a combined weight of 1,200 pounds. (This weight does not include occupants in the sandbox area.) This playset is recommended for children (3) through (11) years of age. On-site adult supervision for children of all ages is recommended.
MAINTENANCE Periodic maintenance is required to ensure safe enjoyment of your playset and optional accessories. Observing the following procedures reduces the likelihood of serious or fatal injury. Activity on your playset and optional accessories may loosen fasteners. Check all lock nuts, hex and lag bolts, quick clips, spring clips, acorn nuts, wood screws, and swing hangers for tightness and tighten as required. T-nuts should be inspected for full and proper seating into the wood.
PLAYGROUND SURFACING MATERIALS SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM SpeciÀcation F 1292.
PLAYSET ORIENTATION *Hint* Throughout this manual references made to the Left Side, the Right Side, the Front Side and the Back Side of the playset serve as a consistent reminder to help with assembly.
IMPORTANT! Use these Assembly Procedure Hints throughout the installation process. 1. All Lag Bolts must have pre-drilled holes. Use a 1/4” drill bit for all 3/8” Lag Bolts. Use a 3/16” drill bit for all 5/16” Lag Bolts. Pre-drilling pilot holes will help prevent Screws and Lag Bolts from breaking and wood from splitting during assembly. DO NOT OVER-TIGHTEN LAG BOLTS 2. In areas where drilling a larger 1/2” hole is neccessary, such as when installing T-Nuts, (Fig.
WOOD PARTS LIST 1 x 3-1/2 x 45-1/8" 2526-CC x1 1-1/2 x 3-1/2 x 47-1/8" 1 x 3-1/2 x 45-1/8" 2501-CC x11 3/4 x 2-1/2 x 45-1/8" 1-1/2 x 3-1/2 x 18" 1-3/8 x 3-3/8 x 51" 1020-CC x8 3/4 x 5-1/2 x 23-3/4" 2521-CC x1 1-3/8 x 3-3/8 x 51" 2517-CC x1 1 x 3-1/2 x 47-1/8" 2518-CC x2 T S 5/8 x 3-1/4 x 29-3/4" 3/4 x 5-1/2 x 44-7/8" 2509-CC x7 1-3/8 x 3-3/8 x 47-3/4" 2527-CC x1 3/4 x 5-1/2 x 23-3/4" 2519-CC x8 2522-CC x1 3 x 3 x 95" 2525-CC x2 2515-CC x1 3 x 3 x 45-1/8" 3 x 3 x 95" W O O D P A R 2
H A R D W A R E 90o Angle Bracket Plate 2485 Swing Beam 90o Plate Swing Beam Angled Plate Left Swing Beam Angled Plate Right x1 L-Bracket 2412 2449 x2 2448 x1 Swing Beam Flat Plate Swing Hanger 2631 x6 2411 Stake 2447 x1 2654 -or2099 x1 2451 x6 2405 x3 2603 x1 Slide 2601-A x4 x1 Trapeze x1 Climbing Rocks O R I E S Swing x1 2434 x2 2435 x1 Safety Handle Plaque S Rope E S IN BAG x4 C 2630 x1 Steering Wheel A C Telescope 2438 x1 2073 9 x1
3/8” LOCK NUT 3/8” LOCK WASHER x44 x20 3/8” x37 3/8” 1/4” x 1” FENDER WASHER 3/8” FLAT WASHER 3/4” 1” x10 x66 x2 3/8” 2-1/2” PAN HEAD SCREW 1/4” LOCK WASHER 1/4” FLAT WASHER 3/16” x 1” FENDER WASHER A S T E N E R S TRUSS HEAD SCREW 3/8” T - NUT 2-1/2” 1/4” x2 x4 x4 Y x4 5/16” 2452 BAG 1/4” ROCK WALL HARDWARE Lock Washer 1-1/4” x12 Hex Bolt 10 Flat Washer T - Nut 1” 5/16” FLAT WASHER x4 A P L x10 5/16” LOCK WASHER 5/16” T - NUT S E T F x6 1/4” 5/16”
3/8” HEX HEAD BOLTS x2 x4 x1 1-3/4" 2" 2-1/4" x26 3-3/4" x4 3/8" P 3/8" 5" 3/8" L A x1 Y T 3/8" 1-1/4" E x1 S x1 F A 3/8" S 3/8" LAG BOLT 3/8" E N 3/8" LAG BOLT T #2 SQUARE DRIVE BIT WOODSCREWS E R x100 x76 1-1/4" 4" 2" x6 2-1/2" 3" 3" 11 S x1 x18 x86
A x2 C T U A x6 L I Z x2 E S H x2 4-1/4" 3-3/4" 3" S O W N x2 6" x1 6-1/4" 8-1/2" 3/8" 3/8" 3/8" 3/8" 3/8" BUTTON HD. SCREW x2 1-1/2” BUTTON HD.
PLAYSET SET-UP SAFETY AREA BACK SIDE 18'-2" 8'-4" SLIDE HEIGHT 10'-2" SWING RIGHT SIDE LEFT SIDE 6' SAFETY AREA ROCK WALL 6' SAFETY AREA FRONT SIDE PLAYSET SET-UP WITH MONKEY BARS SAFETY AREA BACK SIDE 6' SAFETY AREA MONKEY BARS SWING 14'-2" SLIDE HEIGHT 10'-2" ROCK WALL 6' SAFETY AREA FRONT SIDE 13 RIGHT SIDE LEFT SIDE 18'-2"
FORT CORNER POSTS 3-3/4" Hex Bolt Lock Washer x4 Flat Washer 2543-CC Note 2 hole location. Flush Hole for Climbing Rope Flush 2543-CC x1 12-5/8" x1 2526-CC 47" 3 x 3 x 95" 1 x 4 x 45-1/8" Flush 90° 4" 2501-CC x1 1 x 3-1/2 x 45-1/8" T-Nut x6 Flush 4" BOTTOM Align braces with pre-drilled holes. 2503-CC x1 3 x 3 x 95" BASE FORT FLIP ASSEMBLY OVER TO INSTALL BOTTOM BRACE.
FORT CORNER POSTS Note 2 hole location. Large holes toward top 1 x 3-1/2 x 45-1/8" Ensure all bracing is square before installing wood screws. x6 2501-CC x4 x4 T-Nut Flat Washer Lock Washer 3-3/4" Hex Bolt 1 x 5-1/2 x 45-1/8" Flush Flat Washer Lock Nut x2 x2 2507-CC x1 Flush 5" Hex Bolt Flat Washer x1 2508-CC Align braces with pre-drilled holes.
BASE FORT FLIP ASSEMBLY OVER TO INSTALL BOTTOM BRACE. x2 3-3/4" Hex Bolt Lock Washer Flat Washer 90° 1 x 5-1/2 x 45-1/8” 2507-ST x1 Flush Align braces with pre-drilled holes. Flush FORT Align braces with pre-drilled holes. CONNECT FRAME SECTIONS ENSURE THESE HOLES ARE ON THIS SIDE.
FORT CONNECT FRAME SECTIONS 3" Wood Screws x36 Ensure 47" measurement from bottom of base to top of boards. 47" 47" Reinforce bracing with 3" wood screws at all pre-drilled holes.
FORT DECK PLANKS Flush with post. 3/4 x 5-1/2 x 44-7/8" x28 2509-CC x7 2-1/2" Wood Screws evenly spaced 1-1/4" Wood Screws Flush x14 FORT DECK PLANKS 3/4 x 4 x 38-7/8" 2510-CC x2 x8 2-1/2" Wood Screws Flush along outer edge.
FORT DECK SUPPORT 1020-CC Flush with outside. 2" Wood Screws x8 Flush Flush Flush Flush 1020-CC x4 1-1/2 x 3-1/2 x 18" 3" Wood Screws x8 Angle 3" wood screws. Angle 3" wood screws. FORT DECK SUPPORT 2" Wood Screws 1-1/2 x 3-1/2 x 18" x8 x4 1020-CC 2" Wood Screws from inside. 2" Wood Screws Flush 3" Wood Screws x8 Angle 3" wood screws.
FORT DECK RAILS Mark and drill 1/4” x 2” DEEP pre-drill before installing lag bolts. 3" Lag Bolt Lock Washer x4 Flat Washer 2501-CC 1 x 3-1/2 x 45-1/8" 2501-CC x2 Flush at all corners. Bottom rests Áush on lower brace. 3" Wood Screws FRONT SIDE x4 RIGHT SIDE Flush at all corners.
FORT ROOF FRAME 3-3/4" Hex Bolt x4 Lock Washer Flat Washer 1 x 3-1/2 x 63-7/8" 2500-CC x2 T-Nut x4 FORT ROOF FRAME Pre-drill 1/8" pilot holes. Install one 3" wood screw to secure 2504-CC’s.
ASSEMBLE STEP LADDER 2-1/2" Wood Screws x16 1-3/8 x 3-3/8 x 51" 2522-CC x1 1-3/8 x 3-3/8 x 51" x1 2521-CC Flush to front face. 2524-CC x4 Back side of ladder 1 x 3-1/2 x 15-3/8" ROCK WALL ASSEMBLE Align 2520-CC parallel with ladder and maintain dimensions as shown. Position plank 2519-CC as shown and attach to rails with screws.
ROCK WALL ASSEMBLE Place planks onto rails as shown, flush to each other. With all planks flush and snug, secure plank with hole using screws. Maintain dimension shown. 3/4 x 3-1/2 x 23-3/4" 2527-CC x1 23-3/4" All flush HOLE 3/4 x 5-1/2 x 23-3/4" 2519-CC x6 2-1/2" Wood Screws x4 23-3/4" 2 ROCK WALL INSTALL Ensure all plank ends are Áush, making sure screws install into rails.
ROCK WALL ASSEMBLE Pre-drill 5/16" pilot holes. 2451 1/4" x 1-1/4" Hex Bolts 1/4" Lock Washers 1/4" Flat Washers x1 BAG 2 T-Nuts Do NOT attach top board at this time.
ROCK WALL INSTALL Flush Align ladder with inside of post and top of cross brace and mark holes. ROCK WALL INSTALL FRONT SIDE Rock Wall SEE PAGE 7 Pre-drill two 1/4" pilot holes at marked locations. Re-drill holes from opposite side using 3/8" bit.
ROCK WALL INSTALL 5/16" T-Nut x2 FRONT SIDE Rock Wall INSTALL ROCK WALL 1 x 3-1/2 x 17" x1 2222-CC Flush with angle. 2-1/2" Wood screws x4 26 Flush with angle.
ROCK WALL INSTALL x2 Secure middle brace with (2) 2-1/2" Wood Screws from behind. 5/16" Flat Washer 5/16" Lock Washer 5/16" x 1-1/4" Button Head Screw x2 BEGIN HERE x2 2-1/2" Pan Head screw + Flat Washer Flush Flush BEGIN HERE 2-1/2" Pan 1/4” Flat Washer Head screw x2 x2 2" Wood screws INSTALL ANGLE BRACE 3/4 x 5-1/2 x 23-3/4" x1 2519-CC 2514-CC x1 1 x 3-1/2 x 27" Flat Washer Lock Washer 2-1/2" Wood Screws x4 Pre drill 3/16" pilot holes, 2" deep for lag bolt.
SWING BEAM SWING HANGERS - INSTALL Swing Beam Flat Washer Swing Hanger Bolt Swing Hanger Flat Washer IMPORTANT! Final position of each Spring Clip is perpendicular to swing beam. 2631 Swing Hanger x4 Spring Clip You may need to tap with hammer to get though holes. SWING BEAM 3-3/8 x 5-3/ x 95" 2502-CC x1 SWING HANGERS Swing Hanger Bolt must protrude at least TWO Threads beyond Lock Nut. IMPORTANT! 2 Threads MIN.
UPRIGHT INSTALL x2 L EQUA T-Nut L EQUA Flat Washer Lock Washer 1-3/4" Hex Bolt 2505-CC 1 x 3-1/2 x 47" x1 2539-CC Center 2539-CC. Mark and Pre drill 7/16" through holes for hex bolt. A - FRAME ASSEMBLE T-Nut x2 2525-CC x2 3 x 3 x 95" o Rotate 2525-CC 180 after installing T-Nuts.
A - FRAME ASSEMBLE x2 3-3/4" Hex Bolt Lock Washer Flat Washer Pre-installed T-Nuts are underneath.
90o PLATE A - FRAME 2499 x1 x2 3-3/4" Carriage Bolt Lock Nut Flat Washer 2525-CC SWING BEAM ANGLED PLATES 3-3/8 x 5-3/8 x 95” DO NOT FULLY TIGHTEN CARRIAGE BOLTS AT THIS TIME 2502-CC x1 x2 Flat Washer Lock Nut x1 2448 4-1/4" Carriage Bolt x2 x1 NOTE: You may need to tap bolts with hammer to get though holes.
SWING BEAM ASSEMBLE Position swing beam assembly resting upon A-frame. SWING BEAM ASSEMBLE Align holes and insert carriage bolt. Repeat where arrows are shown. NOTE: You may need to tap bolts with hammer to get though holes.
SWING BEAM ASSEMBLE 6-1/4" Carriage Bolt Torque Washer You may need to tap with hammer to get though holes. Flat Washer Lock Nut SWING BEAM INSTALL Position swing beam assembly resting upon plate and align with holes. 8-1/2" Carriage Bolt x1 x1 6-1/4" Carriage Bolt NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts x1 Torque Washer 2485 x1 Align Square Hole in Bracket with pre-drilled hole in swing beam.
SWING BEAM 1. Pre-drill using 3/16" bit. INSTALL SEE PAGE 7 2. Re-drill from opposite side using 7/16" bit.
SWING BEAM 2-1/2" Pan Head Screw ASSEMBLE x2 1/4" Lock Washer BALUSTERS FORT 3-1/4" 3/4" 3-1/4" 3-1/4" 3/4" 3/4" 3/4" 3/4" Install end-balusters Àrst, 3/4" from upright 2539-CC and 3/4" above deck. 3-1/4" x24 2523-CC x6 SPACER SPACER 2539-ST SPACER SPACER 1-1/4" Wood Screws 5/8 x 3-1/4 x 29-3/4" 3/4" Install balusters 3/4" above deck.
BALUSTERS FORT CENTER Center Àrst spacer and install balusters 3/4" above deck. 3-1/4" x24 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 1-1/4" Wood screws SPACER SPACER Install balusters 3/4" above deck. SPACER SPACER 5/8 x 3-1/4 x 29-3/4" SPACER x6 2523-CC 3/4" 3/4" BALUSTER SUPPORTS FORT 1 x 3-1/2 x 12" 2568-CC x2 Large hole DOWN. Large hole UP. 3" Wood Screw x6 Lock Washer 3" Lag Bolt x2 Flush at corner. 3" Wood Screws into deck board ends.
BALUSTERS FORT Install end-balusters Àrst, Áush with inside of posts. 9" 9" 1-1/4" Wood Screws x16 5/8 x 3-1/4 x 29-3/4" 2523-CC x4 Flush 3/4" Flush 3/4" Install balusters 3/4" above deck. ROOF NOTICE IF YOU HAVE THE WOOD ROOF OPTION REFER TO MANUAL AT THIS TIME. IF YOU HAVE THE VINYL CANOPY ROOF CONTINUE AS FOLLOWS.
This space intentionally left blank. VINYL ROOF 1-1/2 x 3-1/2 x 47-1/8" x1 2517-CC FRAME x12 3" Wood Screws Flush 3/4" x2 2518-CC 1 x 3-1/2 x 47-1/8" Pre-drill 1/8" x 1" deep for screws to avoid splitting.
CANOPY INSTALL x1 2939 End Rail 3/4" Pan Head Screw (x10) 3/16" x 1" Fender Washer (x10) Install screws through hem for strength. x10 Fold tarp under canopy end rail.
SWINGS INSTALL Attach Playset Plaque using one 1" philips head screw (provided) at each corner of plaque. 2630 x1 2435 TRAPEZE 2434 2434 SWING SWING 8" 8" Minimum when occupied. Adjust chains at Top.
STEERING WHEEL INSTALL Install 2603 aligned with swing beam inside fort.
INSTALL STAKES 2601-A x2 1/4 x 2-1/2" Lag Bolts x2 SWING BEAM SIDE 1/4 x 2-1/2" Lag Bolts x2 Install stakes into 3x3" uprights. Locate stakes as shown. 2601-A x2 Make sure all base pieces and uprights are resting Áat on the ground. It may be necessary to loosen the soil beneath Playset to make everything level. NOTE: DEPENDING ON THE SLIDE YOUR INSTALL MAY VARY. REFER TO METHODS AS SHOWN.
SLIDE INSTALL FOR 2654 SLIDE, BRANDED 3 Center Slide Block Áush to bottom of deck and secure using (2) 2” Screws. 1 Locate Slide centered in the opening between balusters on the LEFT SIDE of the tower. 2 Pre-drill 1/8" pilot holes through slide at dimples through deck planks. 2490-CC 1-1/2 x 2-1/2 x 24” 4 Secure Slide using (3) 2-1/2”Pan Head screws through pre-drilled holes into slide block.
CLIMBING ROPE INSTALL OPTIONAL: Tie several single knots in locations to allow logical hand-grab points. Step 1 Feed top of Climbing Rope through front of Upper Rail ( 2526-CC) and tie a double knot on the back side (Fig. 1). Step 2 Feed lower end of Climbing Rope through hole in Rock Wall board ( 2527-CC ) and tie a double knot on the back side (Fig. 1). For Safety, insure that the rope is tight enough so that it can not be looped back on itself.
SAFETY HANDLES INSTALL 1-1/2" Lag Bolt Flat Washer 2405 x6 x3 DO NOT OVER-TIGHTEN LAG BOLTS. ACCESSORIES NOTICE IF YOU HAVE MONKEY BAR OR ACTIVITY TABLE REFER TO MANUAL AT THIS TIME.
WARRANTY Backyard Play Systems warrants the following: 1. All wood components have a Limited Five Year Warranty. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a three year Limited Warranty applicable on playsets installed by Backyard Play Systems. Labor warranty does NOT apply to Do-It-Yourself playset kits or kits installed by a third party.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
2694 - NOTICE This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-800-437-0784 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST or email: customerservice@backyard-play.
4HIS PAGE INTENTIONALLY LEFT BLANK
2694 Customer Service 1-800-437-0784 1000 Ternes Monroe, MI 48162 Backyard Play Systems Cedar Roof Accessory 10/28/2013 Model 4185, 4332, 4333, 4334, 4335, 6246, 6351, 6352, 6353, 6354, 6371 Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - Tools Required Phillips Bit Combo Drive Bit Cordless Drill w/Charger Drill Bits Tape Measure Adult Assistance required First... Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
WOOD PARTS Roof Slat Top 3/4 x 5-1/2 x 51-1/8" Roof Slat Mid 3/4 x 5-1/2 x 51-1/8" 5/8 x 3-1/4 x 17-1/16" 2582-CC x2 3/4 x 5-1/8 x 51-1/8" Top Cap 5/8 x 3-1/4 x 51-1/8" 2595-CC x2 5/8 x 3-1/4 x 16-5/8" 2583-CC x12 Roof Slat Bottom Dormer Cap Top Dormer Cap Bottom 2596-CC x2 1/2 x 3 x 5-5/8" 2584-CC x2 Dormer End Cap 2570-CC x2 2585-CC x2 1 x 1-1/2 x 20-3/8" Sun Brace Center 1 x 5-1/2 x 13-3/16" 1 x 1-1/2 x 15-1/8" 2931-CC x2 2932-CC x12 Sun Brace Sun Decoration 2933-CC x2 SUB-ASS
ROOF FRAME INSTALL x12 1-1/2 x 3-1/2 x 47-1/8" 3" Wood Screws x1 2517-CC Flush 3/4" x2 2518-CC 1 x 3-1/2 x 47-1/8" Pre-drill 1/8" x 1" deep for screws to avoid splitting. SUN DECORATION INSTALL Pre-drill 1/8" pilot holes.
SUN DECORATION INSTALL Install 2931-CC centered and Áush using two 1-3/4" screws as shown. Pre-drill with 1/8" pilot holes. Measure and mark rafter as shown. Install each 2932-CC between marks using two 1-3/4" screws. 1 x 2 x 20-3/8" x2 2931-CC Flush at top. Pre-drill 1/8" pilot holes. Install 2931-CC First. 1 x 2 x 15-1/8" 2932-CC x4 Flush at top. 13 -1 /2 " " /2 -1 13 /2" 2-1 2-1/ 2" CENTER 1-3/4" Wood Screws x6 SUN DECORATION INSTALL Center remaining 2932-CC's as shown.
ROOF PLANKS INSTALL Center 2582-CC roof boards on rafters. Ensure equal overhang on both sides; about 1". 1" Maintain 47-1/8" dimension between rafters. 1" 1-3/4" Wood Screws x8 3/4 x 5-1/8 x 51-1/8" 2582-CC x2 47-1/8" Flush at peak. ROOF PLANKS INSTALL BEGIN HERE Install all roof boards Flush. Insert panels fully seated.
ROOF PLANKS INSTALL 1-3/4" Wood Screws x32 3/4 x 5-1/2 x 51-1/8" 2583-CC x3 BEGIN HERE 3/4 x 5-1/2 x 51-1/8" x3 2583-CC x1 2584-CC 2584-CC x1 3/4 x 5-1/8 x 51-1/8" 3/4 x 5-1/8 x 51-1/8" ROOF TOP CAPS INSTALL Install 2585-CC using 1-3/4" screws as shown. Pre-drill with 1/8" pilot holes.
DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Align brace of 3166-CC Áush with right frame of 3167-CC. Ensure Áush at peak, all along edge and at corner. Attach 3166-CC using #8 1-3/4" screws into middle of 3167-CC right frame. 1-3/4" Wood Screws x3 1-1/2 x 17-3/16 x 20-1/2" x1 3166-CC Flush along inner edge. 2 x 14-1/4 x 24-1/4" 3167-CC x1 Pre-drill 1/8" holes through 3166-CC. Flush along inner edge.
DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Ensure Áush at End of roof plank. Attach 2596-CC using #8 1-3/4" screws into roof plank as shown Flush at End. Flush Flush along Edge. 5/8 x 3-1/4 x 16-5/8" 2596-CC x1 1-3/4" Wood Screws x2 DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Ensure 2595-CC is Áush at end and along edge of of roof plank. Attach 2595-CC using #8 1-3/4" screws into roof plank as shown Flush at End. Flush along Edge.
DORMER ASSEMBLE Pre-drill 1"x 1/8" pilot holes. 1/2 x 3 x 5-5/8" BUILD TWO IDENTICAL DORMERS 2570-CC x1 1-3/4" Wood Screws x3 Flush with all sides. You have built TWO Dormers. DORMER INSTALL Attach assembled dormer using #8 2" screws into roof planks as shown. Install screws through dormer roof frame (Fig. 1). 2" Wood Screw x8 Align bottom of dormer frame with top of 2nd roof plank. (Fig. 1) /2" 25-1 /2" 25-1 STOP RETURN TO PLAYSET INSTRUCTION MANUAL.
WARRANTY Backyard Play Systems warrants the following: 1. All wood components have a Limited Five Year Warranty. • Treated Wood - Backyard Play Systems will replace treated wood which becomes structurally unÀt due solely to damage caused by fungal decay or termites. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a three year Limited Warranty applicable on playsets installed by Backyard Play Systems.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 7:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
11/12/2012 Backyard Play Systems Customer Service 1-866-890-2211 1000 Ternes Monroe, MI 48162 Model 3316 Activity Table Accessory Recommended for Ages 3 to 11 Tools Required Phillips Bit Combo Drive Bit Cordless Drill w/Charger Drill Bits Tape Measure - BEFORE YOU BEGIN First... Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
ACTIVITY TABLE PARTS LIST 1 x 3-1/2 x 20-1/2" Seat Board 2934-CC x2 1 x 3-1/2 x 14" Table Board 2935-CC x2 1 x 3-1/2 x 24-3/8" Upright Brace 2936-CC x2 1 x 5-1/2 x 44-7/8" Table and Seat board 2155-CC x3 HARDWARE 1-3/4" x28 3" #8 Screw x8 2" x12 #8 Screw 2 #8 Screw
SEAT SUPPORT INSTALL Second: Install 1-3/4" Screws. 1 x 3-1/2 x 20-1/2" First: EL Install 3" Screws into pre-drilled holes. V x2 2934-ST LE x4 x4 13-3/8" LEVEL L VE LE 13-3/8" Flush TABLE SUPPORT INSTALL Second: Install 1-3/4" Screws. 1 x 3-1/2 x 14" First: L E EV x2 2935-ST x4 Install 3" Screws into pre-drilled holes.
UPRIGHT BRACE INSTALL Install (2) 1-3/4" screws into each side. Make sure seat and table supports are level before securing with 1-3/4" screws. 1-3/4" Screw x20 Flush 12-1/2" 1 x 3-1/2 x 24-3/8" x2 2936-ST TABLE AND SEAT BOARDS INSTALL 2" Screw x12 Flush 5/4 x 6 x 44-7/8" 2536-ST x3 Flush Flush Flush Check all screws are in 2529-ST.
WARRANTY Backyard Play Systems warrants the following: 1. All wood and plastic (polymer) coated wood components have a Limited Lifetime Warranty. • Treated Wood - Backyard Play Systems will replace treated wood which becomes structurally unfit due solely to damage caused by fungal decay or termites. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 7:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
