User Manual

Using IR Remote

Key Functionality Mapping

Key

Function

Initiate configuration of pace clock for Lap mode

Initiate configuration of pace clock for Multi Lap mode

Context aware Configure/Confirm function

Display ON/OFF control

Go to Wall Clock mode or Pace Clock mode if already in wall clock mode

Confirm a selected configuration and start the mode

Change the selected digit up or down

Select the digit to configure while in a configuration mode

Configure Wall Clock Time

1. While in wall clock mode press “C”

2. Press or to select the digit to edit

3. Press or to change the digit to desired value

4. Pres “OK” to confirm and return to wall clock mode

Start Pace Clock mode

1. While in wall clock mode press to go to pace clock mode

2. Pres “OK” to pause or resume the pace clock

Start Lap mode

1. Press “A” to start the lap mode configuration

2. It shows the number of laps and time of each lap. Default is 5 laps of 10 secs each in up count

mode

3. Press or to change up or down count. The blinking colon shows the selection. Upper colon

dot for up count and lower colon dot for down count

4. Press “C” confirm

5. Press to configure number of laps

6. Press “C” confirm

7. Press to configure time of each lap

8. Pres “OK” to start the lap mode

Start Multi Lap mode

1. Press “B” to start the multi lap mode configuration

2. It shows the active lap number to configure and lap time. The default lap time is 10 secs

3. Press “C” to configure the active lap