User Manual

2
Overview
Setting up Pace Clock
The pace clock is powered with the provided wall adapter. The pace clock can be controller
using the provided IR remote controller or using an Android phone or an iPhone over BLE. This
document describes in detail the various mode of operation and controlling the pace clock using the IR
remote control or the phone.
Modes of the Clock
The clock has multiple modes of operation. The following are the details
1. Wall Clock Mode: In the wall clock mode the clock displays the current time in 24-hour
HH:MM format. Both the dots of the colon will blink at an interval of ½ sec.
2. Pace Clock Mode: In this mode the clock will be similar to a stop watch. The counting will
start from 00:00 (MM:SS) and will increment every second. The clock can be paused and
resumed at any time.
3. Lap Clock Mode: In this mode the clock will either up/down count every second for multiple
laps of a fixed time duration. At the end of each lap a buzzer will be sounded for ½ sec and
at the end of all the laps the buzzer will be sounded for 1 sec
4. Multi Lap Clock mode: In this mode the clock will either up/down count every second for
multiple laps for configurable time duration. At the end of each lap a buzzer will be sounded
for ½ sec and at the end of all the laps the buzzer will be sounded for 1 sec
5. Idle Clock Mode: In this mode the clock display is turned OFF. The wall clock will be running
in the back ground.