User Guide

PAGE 35
Caller ID and Message Waiting Indication on the TV
If you are subscribed to Caller ID, it is possible to have
your Caller ID information display on the TV as it
displays on your regular Caller ID device. Also, it is
possible to have voice mail waiting indication
show on your TV.
Note: The Caller ID and Message waiting features are
only available if the subscriber also purchases
the APMAX Voice Mail/Unified Messaging Service.
Press the Green button at any time to see your
Caller ID Recent Calls list. This handy feature allows
you to review a list of phone numbers that have
called your wireline phone service. To delete numbers
from your recent calls list, use the arrow button to
highlight the number you want to delete and
press the Red button on your remote.
Low Battery Pop-up
The Potenza remote control sends a low-battery code
when the battery power drops to the predefined
threshold. It will display a “Remote Battery Low”
window on the TV for a few seconds. This will
display at a maximum of once every 10 minutes.
Caller ID display on the TV example
Important Note
Your remote control can be programmed to power off the television and the set top box at the same time.
However, if they do become out of synch with the TV still on but the set top box turned off, you will see a message on the TV screen
shown below. Simply press the OK button on your remote to turn the power to the set top box back on.
Table of Contents