User Guide

PAGE 17
Recording Conflicts
The DVR can record a limited number of programs at a time. If you
attempt to record more programs than the system is capable of
recording at one time, the DVR will warn you of a recording conflict.
1. You may choose to either resolve the conflict or to cancel your
option to record the program.
2. When you choose “Resolve Conflict,” a guide screen will appear
showing the other programs currently scheduled to be recorded.
3. Highlight the program you wish to stop recording and press the
Stop button on the DVR controls. Choose from the stop recording
options – Continue Recording, Stop Recording and Keep,
Stop Recording, Keep and Protect, or Stop Recording and Delete.
You may now choose the alternate program you wish to record
from the guide and press the Record or OK button.
Attempt to Watch a Locked Channel
If you have locked channels from view, you will need to enter a PIN
in order to access programming on that channel. See the Settings
Menu section (on page 31) for instructions on locking channels.
1. In this example, the channel is locked; you are prompted to enter
a PIN. Until you change it through the Settings menu,
the default PIN is 0000.
2. The Enter PIN screen will remain until a correct PIN is entered or
until you press Exit.
3. Pressing Exit will bring up a screen indicating an invalid PIN was
entered. Press the GUIDE button to browse for another program
to watch. This same result happens when selecting a locked
channel from the Guide.
Attempt to Watch a Program Outside the
Parental Rating Settings
If you have set parental ratings in order to prevent viewing shows
beyond a rating that you find acceptable, you will need to enter
a PIN in order to access programming beyond your specified rating.
See the Settings Menu section (on page 31) for instructions on
setting parental controls.
1. When the program is rated beyond the viewing limits set, you
are prompted to enter a PIN.
2. The Enter PIN screen will remain until a valid PIN is entered or
until you press Exit.
3. Pressing Exit will bring up a screen indicating an invalid PIN was
entered. Press the GUIDE button to browse for another program
to watch. This same result will occur when keying in a channel
number on the remote control.
Table of Contents