Instruction Manual

Copyright Swiftech 2006 – All rights reserved – Last revision date: 10-23-06
Rouchon Industries, Inc., dba Swiftech – 3700 Industry Avenue, Suite 104, Lakewood, CA 90712 – Toll free (US)Tel. [phone] – Fax 562-
595-8769 - E Mail: [e-mail] – URL:
http://www.swiftech.com - Information subject to change without notice
AMD® socket 462 – Athlon®, Duron®, MP, XP
Preamble:
It is necessary to remove the pre-installed hold-down plate prior to installation. Simply unscrew the 4 button head screws
holding the assembly together using the provided 5/64 Allen wrench, remove the hold-down plate, and re-install the screws
with the provided nylon washers instead as shown below.
ITEM #QTY. PART NO.
DESCRIPTION
A 1 socket462
B 1 storm-assy2
C 2 1-4-straightx3-8-barb 1/4" NPSM Barb fitting
D 2 O-RING-9557K473
1-4'" NPSM barb fitting O-Ring
E 4 92949A151
6-32 x 3/4" button socket head screw
M 8 16FW006062 .31x.14x.06 nylon washer
F 4 6-32-Acorn-nut
G 4 SPRING6 70927compressed-to-0337
H 8 12SWS0444 NYLON SHOULDER WASHER
I 4 6-32-nut 6-32 nut
J 4 LOCK-WASHER#6
K 8 FW140X250X0215FB BLK black fiber washer
L 4 6-32X1.750 6-32 x 1 3-4" philips screw
C
D
F
H
G
H
M
B
E
M
I
J
K
K
L
A
Inlet