Manual

–

Last re

vision date: 2

2003

Rouchon Industries, Inc., dba Swiftech

–

1703 E. 28

Street, Signal Hill, CA 90806

–

Tel. 562

595

8009

–

Fax 562

595

8769

E Mail: Swiftech @swiftnets.com

–

URL:

http://www.swiftnets.com

Info

rmation subject to change without notice

Page1of

90MM fan brackets

: install the 4 brackets provided with your

hardware package into the 80mm fan mounting holes. Use the

provided 6

32 x 1/4” philips screws to fasten the brackets to the

heat

sink, and the black plastic snap rivets to fasten the fan to

the brackets.

III. Final inspection

Now that the heatsink is installed, startup your computer, go into the BIOS and observe the CPU temperature. Under normal ambient

temperature condi

tions, the processor temperature should never exceed 60

C (140

F). If it does, shut down the computer immediately,

and review your entire installation. Troubleshooting help is available on our web site at

www.s

wiftnets.com

, or by calling customer

support at 562

595

8009.

DISCLAIMER: Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products.