Owner's manual

Figure 5

Spray the area immediately surrounding the

socket. It is not recommended to spray further

than the area circled in the above picture. Allow

time to dry per manufacturer specs.

ii. Dielectric grease application: This step will ensure that condensation does not form inside of the CPU socket.

Procure a tube of dielectric grease. We use Luberex grease, available on our web site here:

http://www.swiftnets.com/store/category.asp?CatID=11

Figure 6

Figure 7

Squirt a generous amount of grease onto the socket. Force the grease inside of the pin-holes with your finger. Make sure that

the central area of the socket is completely filled with grease.

 To complete the condensation prevention measures, simply apply the neoprene sticker provided with your MCW5002-PT

accessories to the back of the motherboard, directly behind the processor.

b. CPU and cooler installation: