Instruction Manual

1703 E. 28
th
St., Signal Hill, CA 90755
Tel [phone] - Fax [phone]
URL: HTTP://WWW.SWIFTNETS.COM
2
1/ Find a suitable placement for the radiator and fans
Radiator placement example
The radiator installed to the back of this LiteOn's FS020 server
case. It sits on our custom 3/8" thick gasket for perfect sealing.
Radiator & fans placement recommendations
The radiator can be installed wherever you find suit
a
room for it, including: top, backside- panel, front or
b
the case. However, you should avoid installing it on
removable panel, such as the side-access panel. T
h
could cause the tubes to exert uncontrolled pressur
e
the water-block assembly when the panel is fasten
e
removed from the case.
Once you have located a suitable placement, use
the enclosed schematic (appendix A) as a
template to drill the radiator, and fan mounting
holes.
:
2/ Find a suitable placement for the
Fill&Bleed kit
To facilitate bleeding, the fill-and-bleed kit
should always be installed at the highest point
of the circuit, typically at the top of the computer
case. Here is an example:
3/ Find a suitable placement for the water pump : The pump can be installed anywhere. It can be mounted
vertically or horizontally, using the heavy duty Velcro harness provided with your kit