Owner's manual

Copyright Swiftech 2010 – All rights reserved – Last revision date: 8-17-10 - Information subject to change without notice – URL: http://www.swiftech.com
Rouchon Industries, Inc., dba Swiftech – 151 West Victoria Street, Long Beach, CA 90805 – Tel. [phone] – Fax [phone] - E Mail: [e-mail] 12 of 16
c. Optional external panel fill-port (horizontal installations only)
A rubber grommet and a plastic cap are provided with your kit to allow you to create a convenient and clean opening in the upper case
panel so you may access the fill-port for coolant refills at any time. In order to cut the hole, please use a 1” (25mm) bi-metal hole saw.
Center the hole using one of the adjoining 120mm fan holes as reference, as shown below (3D illustrations also provided in the
installation CD):
2. APOGEE™ XTL WATERBLOCK INSTALLATION
 Please refer to the separate installation guide included inside of the waterblock box. Removal of the motherboard is generally
necessary to install the water-block back-plate.
 Once the APOGEE™ waterblock securely fastened to the motherboard, go-ahead and install the motherboard into the chassis,
following the instructions provided in your motherboard installation guide.
3. CONNECTING THE TUBES BETWEEN MCR DRIVE AND APOGEE™ WATERBLOCK
For tube routing, simply follow the 3D model that corresponds to your own installation. Always avoid tight radii in the tubing to prevent it from
kinking. Whenever you encounter a tight spot disallowing sufficient radius in the tube, then use an aftermarket elbow. Please note that excessive
use of elbows in a loop creates substantial pressure drop in the coolant flow, and may affect the performance of your system. Use them
sparingly! With regards to after-market fittings, both the Apogee Water-block and the MCR Drive Radiators are compatible with the G ¼”
standard. Once all the tubes are connected, use the provided hose clamps to secure the tubes to the hose barbs.
4. ELECTRICAL INSTALLATION
Please follow the diagrams below for connecting the components to the motherboard and power supply.
A. Adjustable Pump Speed