Owner manual

Installation guide
Parts list
Parts QTY PARTS QTY
MCW6000-P™ water-block 1 3T spring/clip assemblies 2
Worm drive clamps 2 SK7 hold-down plate 1
This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to
your components. Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products, nor their installation. The
following instructions are subject to change without notice. Please visit our web site at www.swiftnets.com
for updates.
6-32 x 1.00" philips
3-T c lip
MCW6000-A water-block
socket 462 motherboard
socket "Cambox"
Step side over "Cambox"
INLET
DISCHARGE
STIFF spring
black color
SOFT spring
metallic color
SK7 hold-down plate
Figure 1
Copyright Swiftech 2004 – All rights reserved – Last revision date: 11-23-04
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90755 – Tel. [phone] – Fax [phone] - E Mail:
[e-mail] – URL: http://www.swiftnets.com
- Information subject to change without notice Page 29 of 39