Owner's manual

Rouchon Industries, Inc., dbA Swiftech™ – 1703 E. 28
th
St, signal Hill, CA 90755, USA – T [phone] – F [phone] – All content
Copyright Swiftech 2004 – Last edited 11-16-04 – Subject to revision without notice - 17 of 41 -
MCB-120
holding plate
MCB-120
housing
120x25mm
fan
Radiator
Chassis
#6 x 1 1/4" sheet
metal screw
(coarse thread)
6-32 nylon
nut
#4 x 1/4"
sheet metal screw
(course thread)
6-32 x 1" machine screw (fine thread) Use alternate 6-32 x 1 1/2" for thick acrylic panels or provided 4-40 x 1 1/4" with nuts and washers for 60mm fan openings
1/2" Nylon spacer (use as needed to provide clearance with side panel) or alternatively use (1) or (2) provided nylon washers
#4 worm-drive
hose clamp
Pass-thru adapter
Custom PCI
bracke
t
Pass-thru nut
Fan power connector thru PCI bracket
Pump inlet
reservoir discharge
Pump discharge