User Manual

ManualsBrandsSwiftech ManualsComputer AccessoriesCrossfire bridges X2 and X3 for Komodo 7900

free 888-857-9438 – Tel. (310) 763-0336, Fax (310) 763-7095 - E Mail: help@swiftech.com – URL: http://www.swiftech.com - Information subject to change without notice

INSTALLATION GUIDE – GUIDE D’INSTALLATION – GUÍA D’INSTALACION

1. DISASSEMBLE THE X2/X3 BRIDGE COVER

1. DÉMONTER LE COUVERCLE DU BRIDGE X2/X3

1. RETIRE LA CUBIERTA DEL PUENTE X2/X3

2. DISASSEMBLE THE ORIGINAL

BRIDGE

2. DÉMONTER LE BRIDGE

D’ORIGINE

3. QUITAR EL PUENTE DE ORIGEN

Summary of content (2 pages)

PAGE 1
INSTALLATION GUIDE – GUIDE D’INSTALLATION – GUÍA D’INSTALACION 1. DISASSEMBLE THE X2/X3 BRIDGE COVER 1. DÉMONTER LE COUVERCLE DU BRIDGE X2/X3 1. RETIRE LA CUBIERTA DEL PUENTE X2/X3 2. DISASSEMBLE THE ORIGINAL BRIDGE 1 2. DÉMONTER LE BRIDGE D’ORIGINE 3. QUITAR EL PUENTE DE ORIGEN 2 Copyright Swiftech® 2012 – All rights reserved – Last revision date: 3-22-12 – Rouchon Industries Inc., dba Swiftech® –151 West Victoria St., Long Beach, CA 90805 – Toll free 888-857-9438 – Tel.
PAGE 2
3. INSTALL THE BRIDGE TO THE WATER-BLOCKS Use a 3mm Allen wrench to fasten the screws. Tighten firmly but without excess. 1 3. INSTALLER LE BRIDGE AUX BLOCS DE REFROIDISSEMENT Utiliser une clé Allen de 3 mm pour fixer les vis. Serrez fermement mais sans excès. 3. INSTALAR EL PUENTE A LOS BLOQUES DE REFRIGERACIÓN Utilice una llave Allen de 3 mm para apretar los tornillos. Apriete con firmeza pero sin excesos.