Owner manual
Copyright Swiftech 2012 – All rights reserved – Last revision date: 6-6-12 - Rouchon Industries, Inc., dba Swiftech® –151 West Victoria Street, Long Beach, CA 90805 – Tel.
310-763-0336 - Toll free (US) 888-857-9438 – Fax 310-763-7095 - E Mail: help@swiftech.com – URL: http://www.swiftech.com - Information subject to change without notice
Installation to the Motherboard
Clean the CPU with a degreaser (preferably formulated for
electronics) then apply the supplied Tim-Mate thermal
compound.
Lower the Apogee™ Drive II onto the CPU, and align the
spring loaded screws with their respective mounting holes.
Then fasten the screws alternatively and in a cross-pattern
until they bottom out. The Apogee™ Drive II can be
installed in any orientation with respect to the socket.
Electrical Installation
Hydraulic Installation
To power supply
To motherboard 4-pin CPU header